博科新款交换机silkworm 300已经开始慢慢上市了，今天拿到一台给HP OEM的博科300交换机，惠普的型号是storageworks 8/8，24端口，激活8个端口。接下来是小编为大家收集的博科brocade300密码重置方法，希望能帮到大家。

博科brocade300密码重置方法

贴的标是惠普的，但是一看就知道是博科的东西，随机的光盘就是博科的光盘。博科300的默认用户名是admin，默认密码是password。由于这台机器用户做过设置，密码改过了需要重设一下。博科交换机是没有reset按钮的，必须通过console线连接通过命令重置。

博科300的os是用的linux 2.6的核心，最高权限的管理帐号是root。重置交换机密码就是用这个帐号。

swd77 login: root

Password: fibranne

使用该帐号登陆后会出现下面的信息：

Disclaimer for Root and Factory Accounts Usage!

This Fibre Channel switch is equipped with Root and Factory accounts

that are intended for diagnostics and debugging purposes solely by

the Equipment vendor's trained engineers. Improper use of the

functionality made available through the Root or Factory account could

cause significant harm and disruption to the operation of the SAN fabric.

Your use of the functionality made available through the Root or Factory

account is at your sole risk and you assume all liability resulting from

such use. The Equipment vendor shall have no liability for any losses

or damages arising from or relating to the use of the Root or Factory

account (and the functionality enabled thereby) by anyone other than

the Equipment vendor's authorized engineers.

Proceeding with the usage of this switch as the Root or Factory user

explicitly indicates your agreement to the terms of this disclaimer.

Please change passwords for switch default accounts now.

Use Control-C to exit or press 'Enter' key to proceed.

这里用Control-C结束就行了，如果回车会让分别设置各个帐号的密码，出现如下信息：

Warning: Access to the Root and Factory accounts may be required for

proper support of the switch. Please ensure the Root and Factory

passwords are documented in a secure location. Recovery of a lost Root

or Factory password will result in fabric downtime.

for user - root

Changing password for root

Enter new password:

Password unchanged.

passwd: Authentication token manipulation error

Please change passwords for switch default accounts now.

for user - factory

Changing password for factory

Enter new password:

Password unchanged.

passwd: Authentication token manipulation error

Please change passwords for switch default accounts now.

for user - admin

Changing password for admin

Enter new password:

Password unchanged.

passwd: Authentication token manipulation error

Please change passwords for switch default accounts now.

for user - user

Changing password for user

Enter new password:

Password unchanged.

passwd: Authentication token manipulation error

登陆后是用passwddefault命令恢复出厂密码

swd77:root> passwddefault

Password policies are already set to default.

All account passwords have been successfully set to factory default.

swd77:root>

看了“博科brocade300密码重置方法”还想看：

1.路由器用户名密码怎么重置

2.怎么重置路由器登录密码

3.TP-Link路由器密码重置图解

4.路由器wifi密码怎么重置

5.如何用简单命令重置路由器密码