cisco静态路由的应用怎么配置

发布时间:2016-12-02 07:49

思科cisco生产的路由器、交换机设备和其他设备承载了全世界80%的互联网通信,成为硅谷中新经济的传奇,那么你知道cisco静态路由的应用怎么配置吗?下面是小编整理的一些关于cisco静态路由的应用怎么配置的相关资料,供你参考。

cisco静态路由的应用配置的方法:

静态路由的应用

Switch 0 的配置:

Switch>en

Switch>enable

Switch#conf

Switch#configure

Switch#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)#int

Switch(config)#interface f0/1

Switch(config-if)#no swi

Switch(config-if)#no switchport

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to upSwitch(config-if)#

Switch(config-if)#ip add

Switch(config-if)#ip address 1.1.1.1 255.0.0.0

Switch(config-if)#no shut

Switch(config-if)#no shutdown

Switch(config-if)#exit

Switch(config)#int

Switch(config)#interface f

Switch(config)#interface fastEthernet 0/2

Switch(config-if)#ip add

Switch(config-if)#no sw

Switch(config-if)#no switchport

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to upSwitch(config-if)#

Switch(config-if)#ip addre

Switch(config-if)#ip address 2.2.2.1 255.0.0.0

Switch(config-if)#no shut

Switch(config-if)#no shutdown

Switch(config-if)#exit

Switch(config)#ip route 4.0.0.0 255.0.0.0 f

Switch(config)#ip route 4.0.0.0 255.0.0.0 f?

FastEthernet

Switch(config)#ip route 4.0.0.0 255.0.0.0 fa

Switch(config)#ip route 4.0.0.0 255.0.0.0 fastEthernet 0/2

Switch(config)#no shut

Switch(config)#exit

%SYS-5-CONFIG_I: Configured from console by console

Switch#show ip route

Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP

i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

* - candidate default, U - per-user static route, o - ODR

P - periodic downloaded static route

Gateway of last resort is not set

C 1.0.0.0/8 is directly connected, FastEthernet0/1

C 2.0.0.0/8 is directly connected, FastEthernet0/2

S 4.0.0.0/8 is directly connected, FastEthernet0/2

Switch#

Switch#show ?

access-lists List access lists

adjacency Adjacent nodes

arp Arp table

cdp CDP information

clock Display the system clock

controllers Interface controllers status

crypto Encryption module

debugging State of each debugging option

dhcp Dynamic Host Configuration Protocol status

etherchannel EtherChannel information

flash: display information about flash: file system

frame-relay Frame-Relay information

history Display the session command history

hosts IP domain-name, lookup style, nameservers, and host table

interfaces Interface status and configuration

ip IP information

ipv6 IPv6 information

mac-address-table MAC forwarding table

ospf For OSPF debug only

ospfv3 For OSPFv3 debug only

processes Active process statistics

protocols Active network routing protocols

running-config Current operating configuration

sessions Information about Telnet connections

spanning-tree Spanning tree topology

ssh Status of SSH server connections

startup-config Contents of startup configuration

tcp Status of TCP connections

terminal Display terminal configuration parameters

users Display information about terminal lines

version System hardware and software status

vlan VTP VLAN status

vtp Configure VLAN database

Switch#show ip ?

access-lists List access lists

arp IP ARP table

cef Cisco Express Forwarding

dhcp Show items in the DHCP database

eigrp IP-EIGRP show commands

interface IP interface status and configuration

nat IP NAT information

ospf OSPF information

protocols IP routing protocol process parameters and statistics

rip IP RIP show commands

route IP routing table

ssh Information on SSH

Switch#show ip int

Switch#show ip interface ?

Ethernet IEEE 802.3

FastEthernet FastEthernet IEEE 802.3

GigabitEthernet GigabitEthernet IEEE 802.3z

Loopback Loopback interface

Serial Serial

Vlan Catalyst Vlans

brief Brief summary of IP status and configuration

Switch#show ip interface f

Switch#show ip interface fastEthernet 0/1

FastEthernet0/1 is up, line protocol is up

Internet protocol processing disabled

Switch#show ip interface fastEthernet 0/2

FastEthernet0/2 is up, line protocol is up

Internet protocol processing disabled

Switch#show ru

Switch#show running-config

Building configuration...

Current configurat

!

hostname Switch ion : 1168 bytes

!

version 12.2

no service password-encryption

!

!

!

!

!

ip ssh version 1

!

port-channel load-balance src-mac

!

interface FastEthernet0/1

no switchport

ip address 1.1.1.1 255.0.0.0

duplex auto

speed auto

!

interface FastEthernet0/2

no switchport

ip address 2.2.2.1 255.0.0.0

duplex auto

speed auto

!

cisco静态路由的应用怎么配置的评论条评论